Skip to main content
DO-1 User Manual

DO (Dissolved Oxygen/Total Dissolved Oxygen)-1 User Manual (Pulse Hub Ready Sensor)

John McLaughlin avatar
Written by John McLaughlin
Updated over 3 months ago

Sensor Specifications

Measurement Range

0-20mg/l OR 0-200% saturation

Accuracy

±5%

Drift

±1%/Year

Temperature Range

32 - 122°F | 0 - 50°C

Cable Length

15 Feet | 5 Meters

Intended Usage/Installation

DO-1 is meant to be fully submerged in your tank/reservoir. The sensor can be placed loosely but some form of mounting is always best to get the most accurate readings from a single location.

Maintenance/Calibration

Maintenance/Calibration is not required for DO-1.

FAQ (Frequently Asked Questions)

Why are DO (Dissolved Oxygen) sensors useful?

Can my sensor remain fully submerged? Yes! DO-1 is meant to be fully submerged in your tank/reservoir.

Running into issues? Reach out to us at support@pulsegrow.com or give us a call at 888-537-8573 during our business hours (M-F 9a-4p PT) so we can take care of you!

Did this answer your question?